Are you a current MyCARDONE customer? Login Here

Brake Master Cylinder - 11-4162

PART NUMBER:
11-4162

PART TYPE:
Brake Master Cylinder
WHERE TO BUY
Remanufactured products only require 15-20% of the total energy and material it takes to manufacture new parts while keeping usable cores out of landfills

Product Description

CARDONE Remanufactured Master Cylinders are re-engineered, built and tested to match O.E. performance. Each unit features new, O.E.-quality seals and cups to ensure leak-free, long-lasting performance. Cast-iron master cylinders are treated with a premium protective coating to minimize rust and extend product life. All units are 100% computer tested to ensure perfect fit and function.

  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Complete the Check It Fits tool and confirm all information in the Fitment Details section above to ensure you select the right part for your application.

Core

What is a core?

A core is a used automotive part that is returned to the remanufacturer instead of being scrapped.

Why return cores?

Cores are literally at the “core” of the remanufacturing process, because they are the raw material used to start the remanufacturing process. That’s why remanufacturers buy cores back from customers, and they pay the most for good quality cores. If a core has too much damage in key areas, it may be unusable or require extra resources to process; therefore a reduced core payment may be awarded. This core policy explains potential deductions that may be taken from the core price if certain components are missing or damaged.

What is remanufacturing?

Remanufacturing is the process of taking used parts, completely disassembling and thoroughly cleaning them, replacing the worn components with original quality components, and restoring them to their original function. Every unit is 100% tested to ensure O.E. performance.

Why “reman”?

PRODUCTS
Reman captures used, durable goods like auto parts and puts them “back on the road” to new and sometimes better than new performance. Reman provides the opportunity for detection of common failure modes and incorporation of design improvements to prevent repeat failure.
ECONOMY
Reman products cost consumers about 40% less than new. Reman products are one of the few “green” products that actually costs less than their “non-green” counterparts.
ENVIRONMENTAL
Reman saves up to 86% of the energy required to build a new unit. Reman realizes Greenhouse Gas savings of up to 25 lbs. per unit over new. Reman saves up to 85% of the raw material required to produce a new unit by reusing existing products. Reman is even more sustainable than recycling, as product castings are preserved rather than melted down to raw material, saving energy and reducing emissions.

Warranty Policy

Installation & Tech Checks

Core Policy

ProTech Bulletins

General

Part Type:
Brake Master Cylinder
Product Condition:
Remanufactured
Lifecycle Status:
Available to Order
Package Contents:
Master Cylinder
Packaged Weight:
1.6 lb
UPC:
00082617900423
E-Waste:
No

Technical

Bore Diameter N:
0.937"
Color:
Gray
Installation Hardware Included:
No
Material:
Aluminum
Mounting Hole Quantity:
2
Port Quantity:
2
Primary Port Size:
M12 x 1.0
Reservoir Included:
No
Secondary Port Size:
M12 x 1.0