Customers: The transition from MyCARDONE to the new CARDONE.com is underway. Watch your email!

Fuel Injection Throttle Body - 6E-9015

PART NUMBER:
6E-9015

PART TYPE:
Fuel Injection Throttle Body
Fuel Injection Throttle Body - 6E-9015
WHERE TO BUY
Click for more info CARDONE's skilled technicians and engineers can completely rebuild your part and return it to you, good as new. Learn More.

Product Description

CARDONE New Wiper Motor Pulse Boards are backed by CARDONE Engineered Technology, which ensures that all CARDONE New Wiper Motor Pulse Boards meet or exceed OEM performance. CARDONE Wiper Motor Pulse Boards feature technology that prevents cracked solder joints, a common cause of original unit failure, providing a quality product that you and your vehicle can rely on.


  • Critical components used in manufacturing the electronic throttle body, including the housing, throttle plate, position sensors, throttle actuator motor and throttle plate return spring conform to precise O.E. dimensions.
  • Each throttle body is tested for all critical functions, including response time and air flow at multiple points, ensuring an optimal fuel/air ratio.

    • Product & Technical

    Will I have to modify anything on the vehicle to install your new throttle body?
    When installing the new electronic throttle body, there is no need to modify the vehicle for installation.


    What’s an electronic throttle body?
    The electronic throttle body is a powertrain component that has a plate, motor, and integrated position sensors which are utilized to regulate the amount of air entering the engine by opening the throttle valve to a desired angle via commands from the vehicle’s powertrain control module or throttle actuator control module.


    Are your new throttle bodies the same design as O.E.?
    The new electronic throttle body is engineered and manufactured to match the O.E. design.
    Is it OK to bypass the coolant hoses?
    No, bypassing the coolant hoses is not recommended. There are cases where we sell units without coolant pipes, because we are following O.E. supersessions where the pipes have been removed. Instructions are provided for rerouting coolant hoses.
    Do all throttle bodies have an ice-breaker mode for extreme cold starts?
    Not all throttle bodies have this feature, where the throttle valve is reversed from its normal movement by the control module, which breaks up any ice formation between the throttle bore and valve. This feature is based on application.
    What else does the throttle body control other than idle air bypass and acceleration throughout driving range?
    The throttle body is also part of the cruise control, traction control, stability control, and pre-crash systems, as well as other systems that require engine torque management.


    What happens when an electronic throttle body fails?
    When an electronic throttle body fails, the controlling module will illuminate the MIL/SES/CEL. The module will then activate a fail-safe mode operation and gradually reduce the engine’s speed back to an idle RPM.


    What causes the electronic throttle body to fail?
    The most common failure in an electronic throttle body is the integrated throttle position sensor. The ETB is equipped with high and low voltage reference throttle position sensor for redundancy. Either one of these sensors could fail, or possibly both.


    Is there anything that has to be done after installing the replacement throttle body?
    A relearn calibration procedure is necessary after installation of replacement throttle body.


    Can I purchase a throttle body with a bigger bore to increase horsepower and improve my throttle response?
    Swapping your throttle body for one with a bigger bore is not recommended. The throttle bodies we sell are specific to the application.


    What else does the throttle body control other than idle air bypass and acceleration throughout driving range?
    The throttle body is also part of the cruise control, traction control, stability control, and pre-crash systems, as well as other systems that require engine torque management.


    Do all throttle bodies have an ice-breaker mode for extreme cold starts?
    Not all throttle bodies have this feature, where the throttle valve is reversed from its normal movement by the control module, which breaks up any ice formation between the throttle bore and valve. This feature is based on application.


    Do you sell throttle body spacers?
    We do not sell throttle body spacers, nor do we recommend the use of a spacer.


    Warranty Policy

    Installation & Tech Checks

    Core Policy

    ProTech Bulletins

    General

    pdm:general_part_type:
    Fuel Injection Throttle Body
    pdm:general_product_condition:
    New
    Life Cycle Status:
    Available to Order
    pdm:general_package_contents:
    Electronic Throttle Body; Instruction Sheet
    pdm:general_package_weight:
    2.50 lb
    UPC:
    00884548345911
    pdm:general_e_waste:
    Yes
    pdm:general_warranty:
    Limited Lifetime
    *A warranty must be returned to the parts supplier where the CARDONE product was purchased and is subject to that part store's terms & conditions. If the parts retailer offers a different warranty than the CARDONE warranty, the retailer’s policy will prevail.

    Technical

    Bore Diameter - Metric:
    65 mm
    Finish:
    Natural
    Fuel System Grade:
    Regular
    Fuel System Type:
    Gas
    Gasket or Seal Included:
    No
    Housing Color or Finish:
    Natural
    Inlet Diameter - Metric:
    75 mm
    Inlet Type:
    Circle
    Material:
    Aluminum, Steel, Plastic
    Outlet Diameter - Metric:
    66 mm
    Outlet Type:
    Round
    Spacer Included:
    No
    Throttle Body Actuation Type:
    Electric
    Venturi Quantity:
    1
    pdm:Adjustable:
    No
    pdm:Bore Diameter:
    2.559 IN
    pdm:Fuel Injectors Included:
    No
    pdm:Fuel System Grade:
    Regular
    pdm:Fuel System Type:
    Gas
    pdm:Gasket Or Seal Included:
    No
    pdm:Idle Air Control Motor Included:
    No
    pdm:Inlet Diameter:
    75.00 MM
    pdm:Inlet Diameter:
    2.953 IN
    pdm:Inlet Type:
    Circle
    pdm:Mounting Hardware Included:
    No
    pdm:Outlet Diameter:
    2.598 IN
    pdm:Outlet Diameter:
    66.00 MM
    pdm:Outlet Type:
    Round
    pdm:Terminal Type:
    Pin
    pdm:Throttle Body Finish:
    Natural
    pdm:Throttle Body Spacer Included:
    No
    pdm:Throttle Body Type:
    Electric
    pdm:Throttle Position Sensor Included:
    Yes
    pdm:Venturi Quantity:
    1