Check Out the Newest Releases to Our Catalog!

Rack and Pinion Assembly - 22-203T

PART NUMBER:
22-203T

PART TYPE:
Rack and Pinion Assembly
WHERE TO BUY
Remanufactured products only require 15-20% of the total energy and material it takes to manufacture new parts while keeping usable cores out of landfills

Product Description

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

  • 100% replacement of rubber sealing components.
  • Application of specialized lubricant(s) for extended life.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
  • Finished in protective coating to prevent corrosion and rust.
  • Built to meet or exceed O.E.M. performance.
  • Computerized spool valve balancing ensures exceptional steering feel.
  • Environmentally-friendly coating applied to tie rods and lines to provide a clean appearance and prevent rust.
  • Performance testing ensures perfect fit, function and reliable performance.
  • Supplied with O.E.M. grade seals, O-rings and boots to provide optimal sealing performance and longevity.
  • Application-specific, in-line filter provided with each unit. No filter modifications required.
  • Built to meet or exceed O.E.M. performance.
  • Computerized spool valve balancing ensures exceptional steering feel.
  • Each unit performance tested to ensure perfect fit, function, and reliable performance.
  • Environmentally friendly coating applied to tie rods and lines to provide a clean appearance and prevent rust.
  • Supplied with O.E.M. grade seals, O-rings, and boots to provide optimal sealing performance and longevity.

Complete the Check It Fits tool and confirm all information in the Fitment Details section above to ensure you select the right part for your application.

Core

What is a core?

A core is a used automotive part that is returned to the remanufacturer instead of being scrapped.

Why return cores?

Cores are literally at the “core” of the remanufacturing process, because they are the raw material used to start the remanufacturing process. That’s why remanufacturers buy cores back from customers, and they pay the most for good quality cores. If a core has too much damage in key areas, it may be unusable or require extra resources to process; therefore a reduced core payment may be awarded. This core policy explains potential deductions that may be taken from the core price if certain components are missing or damaged.

What is remanufacturing?

Remanufacturing is the process of taking used parts, completely disassembling and thoroughly cleaning them, replacing the worn components with original quality components, and restoring them to their original function. Every unit is 100% tested to ensure O.E. performance.

Why “reman”?

PRODUCTS
Reman captures used, durable goods like auto parts and puts them “back on the road” to new and sometimes better than new performance. Reman provides the opportunity for detection of common failure modes and incorporation of design improvements to prevent repeat failure.
ECONOMY
Reman products cost consumers about 40% less than new. Reman products are one of the few “green” products that actually costs less than their “non-green” counterparts.
ENVIRONMENTAL
Reman saves up to 86% of the energy required to build a new unit. Reman realizes Greenhouse Gas savings of up to 25 lbs. per unit over new. Reman saves up to 85% of the raw material required to produce a new unit by reusing existing products. Reman is even more sustainable than recycling, as product castings are preserved rather than melted down to raw material, saving energy and reducing emissions.

Warranty Policy

Installation & Tech Checks

Core Policy

ProTech Bulletins

General

Part Type:
Rack and Pinion Assembly
Product Condition:
Remanufactured
Lifecycle Status:
Available to Order
Package Contents:
Rack and Pinion, Mounting Bushings Assembly, Sealing Kit, Instruction Sheet
Packaged Weight:
18.9 lb
UPC:
00082617160254
E-Waste:
No
Warranty:
3 Year/36,000 Mile
*A warranty must be returned to the parts supplier where the CARDONE product was purchased and is subject to that part store's terms & conditions. If the parts retailer offers a different warranty than the CARDONE warranty, the retailer’s policy will prevail.

Technical

Width:
48.75 (in)
Height:
6.50 (in)
Depth:
10.25 (in)
Casting Material:
Aluminum
Distance Between Mounting Holes - Imperial:
15.50 in
Distance Between Mounting Holes - Metric:
393.70 mm
Hose Port Type:
Teflon
Input Shaft Diameter - Imperial:
0.73 in
Input Shaft Diameter - Metric:
18.42 mm
Input Shaft Length - Imperial:
2.25 in
Input Shaft Length - Metric:
57.15 mm
Number of Mounting Holes:
2
Pressure Port Thread Size:
9/16 x 18
Rack Length - Imperial:
45.25 in
Rack Length - Metric:
1149.35 mm
Return Port Thread Size:
5/8"- 18
Steering Rack Color:
Black
Thread Length - Imperial:
4.00 in
Thread Length - Metric:
101.60 mm
Tie Rod Ends Included:
Yes
Total Turns Lock to Lock:
3