Product Description
Our new calipers are manufactured using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. As a direct-fit component, our new zinc coated calipers provide hassle-free installation and long-term reliability.
Product & Technical
Brakes squeal all of the time.  What's causing the squeal?
 Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
 As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
 Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle.  It is recommended that the installer follow the manufacturer’s recommendations.What type of grease is used on floating caliper mounting pins?
 A silicone grease is used on floating caliper mounting pins.Do all of your Calipers come with the new hardware and a mounting bracket for installation?
 New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application.  Mounting Brackets are also sold separately for most applications.Could calipers be the cause of a low brake pedal?
 A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.Car pulls to one side during braking. Why?
 Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.Warranty Policy
Installation & Tech Checks
Core Policy
ProTech Bulletins
General
pdm:general_part_type:
                  Disc Brake Caliper
              pdm:general_product_condition:
                  New
              Life Cycle Status:
                  Obsolete
              pdm:general_package_contents:
                  Caliper; Instruction Sheet; Bracket; Hardware Kit
              pdm:general_package_weight:
                  6.00 lb
              UPC:
                  00884548295841
              pdm:general_e_waste:
                  No
              pdm:general_warranty:
                  Limited Lifetime
                  *A warranty must be returned to the parts supplier where the CARDONE product
                      was
                      purchased and is subject to that part store's terms & conditions. If the parts retailer offers a
                      different warranty than the CARDONE warranty, the retailer’s policy will prevail.
              Technical
pdm:Abutment Clips Included:
                  Yes
              pdm:Anti-Rattle Spring Included:
                  No
              pdm:Bleeder Screw Included:
                  Yes
              pdm:Bleeder Screw Quantity:
                  1
              pdm:Bleeder Thread Size:
                  M10x1.0
              pdm:Bracket Included:
                  Yes
              pdm:Caliper Color:
                  Silver
              pdm:Caliper Finish:
                  Zinc Plated
              pdm:Caliper Slides Included:
                  Yes
              pdm:Caliper Type:
                  Floating
              pdm:Disc Brake Caliper Casting Material:
                  Cast Iron
              pdm:Grade Type:
                  Regular
              pdm:Inlet Fitting Type:
                  Banjo
              pdm:Inlet Port Size:
                  M10x1.0
              pdm:Mounting Bolt Included:
                  No
              pdm:Mounting Bracket Included:
                  Yes
              pdm:Mounting Hardware Included:
                  Yes
              pdm:Mounting Hole Diameter:
                  0.394 IN
              pdm:Mounting Hole Thread Diameter:
                  0.394 IN
              pdm:Pad Wear Sensor Included:
                  Yes
              pdm:Pads Included:
                  No
              pdm:Piston Diameter:
                  1.34 IN
              pdm:Piston Diameter:
                  33.91 MM
              pdm:Piston Material:
                  Steel
              pdm:Piston Quantity:
                  1
              pdm:Rust Resistant Coating:
                  Yes
               
             
                             
                         
                         
                         
                         Description
Description Product
          Specs
Product
          Specs FAQ's
FAQ's Downloads
Downloads